FX1000 · Laser files
Pedal Box Laser Files for Crosskart Buggy
These are the DXF files to laser cut the required components to build the pedal box for your crosskart buggy.
- DXF
- iDEAL, cards, PayPal and Apple Pay
About this product
This product contains the DXF files that can be loaded directly into a laser cutter.
The pedal box is specially designed for Crosskart buggy’s with motorcycle engines. The pedal box has different travel options due to an extra lever stage on throttle and clutch pedal to fit different engine types. Through the demountable top plate you can easily change your throttle and clutch pedal cable setup and travel. The Wilwood T-1 master cylinder will give you a solid and safe braking system due to its separated front and rear brake lines. All pedals have their own torsion spring to get the pedals back to their neutral position and on both travel ends an adjuster bolt to setup the correct end stops (except the brake pedal).
This product is downloadable. You will receive DXF files, which can be downloaded immediately after purchase. If you don’t have the plan to build the pedal box yet, make sure to order the PDF files to build the pedal box as well.
- Easy fit in Ø40 mm chassis tubes
- Position variations possible
- Multiple mounting brackets
- 4 settings for throttle travel deviations possible
- 3 settings for clutch travel deviations possible
- Suitable for Wilwood T-1 master cylinder
- Front and rear brake system separated
- Torsion returner spring on each pedal
- Easy access to change setup
- Grip decal for positive feet rest
Technical specifications
| Part number | 02-1000-00005 |
|---|
Part of the FX1000 build
Where this fits
- Module 1 Frame
- Module 2 Front suspension
- Module 3 Rear suspension
- Module 4 Center hub
- Module 5 Pedal box You are here
- Module 6 Steering
- Module 7 Gear lever
Questions builders ask
How do I receive the plan?
Right after payment you get a download link by email and in your account.
Which engines fit the FX1000?
Chain-driven motorcycle engines with an internal sequential gearbox, up to 180 hp and 120 Nm. For a first build we advise a 600 cc fuel-injected engine.
Do I also need the laser files?
The plan has drawings of every part. With the laser files (DXF) a laser cutting shop can cut all sheet metal parts straight away, so you don't have to draw them yourself.
What skills and tools do I need?
You need to read technical drawings and weld (MIG/MAG for the frame and A-arms, TIG for small parts), and cut and bend tubes or buy them bent. A small press and a heat source for the bearings; further standard tools.
Ask the engineer
Not sure this fits your build, or stuck on a detail? Ask the people who designed it.
Within the EU you pay 21% Dutch VAT; outside the EU no VAT is charged. Checkout calculates it from your shipping address. Read more about VAT
Physical products: 14 days to change your mind. Plans and laser files can't be returned. Terms and conditions
All fields are required.
