FX1000 · Laser files
Rear Suspension Laser Files for Crosskart Buggy
These are the DXF files to laser cut the required components to build the rear suspension for your crosskart buggy.
- DXF
- iDEAL, cards, PayPal and Apple Pay
About this product
This product contains the DXF files that can be loaded directly into a laser cutter.
This rear suspension is specially designed for off-road use and gives great handling and good traction due to its double A-arm independent format. The rear suspension is based on standard BMW E34 driveshafts with bolt on joints on both sides and are available worldwide. The complete plans for the center hub with detailed drawings and a 1:1 drawing to use as jig for bottom and top A-arm will be included in the plans. The uprights are designed for 12” rims and there are options for different bolt patterns. Dimensions drawing for shock manufacturer included.
This product is downloadable. You will receive DXF files, which can be downloaded immediately after purchase. If you don’t have the plan to build the rear suspension yet, make sure to order the PDF files to build the rear suspension as well.
- Independent double A-arm construction
- OEM BMW E34 driveshafts
- Low friction PU hinge bushings with O-rings in A-arms
- Includes chain tensioner system
- Includes chain wheel
- Different ATV wheel flange bolt patterns available
- Centre brake disc Ø260 mm
- Designed for OEM Honda PC35 left front brake caliper
- Roll / camber at full bump 6º
Technical specifications
| Track width | 1475 mm |
|---|---|
| Wheel travel | 241 mm |
| Shock travel | 135 mm |
| Part number | 02-1000-00003 |
Part of the FX1000 build
Where this fits
- Module 1 Frame
- Module 2 Front suspension
- Module 3 Rear suspension You are here
- Module 4 Center hub
- Module 5 Pedal box
- Module 6 Steering
- Module 7 Gear lever
Questions builders ask
How do I receive the plan?
Right after payment you get a download link by email and in your account.
Which engines fit the FX1000?
Chain-driven motorcycle engines with an internal sequential gearbox, up to 180 hp and 120 Nm. For a first build we advise a 600 cc fuel-injected engine.
Do I also need the laser files?
The plan has drawings of every part. With the laser files (DXF) a laser cutting shop can cut all sheet metal parts straight away, so you don't have to draw them yourself.
What skills and tools do I need?
You need to read technical drawings and weld (MIG/MAG for the frame and A-arms, TIG for small parts), and cut and bend tubes or buy them bent. A small press and a heat source for the bearings; further standard tools.
Ask the engineer
Not sure this fits your build, or stuck on a detail? Ask the people who designed it.
Within the EU you pay 21% Dutch VAT; outside the EU no VAT is charged. Checkout calculates it from your shipping address. Read more about VAT
Physical products: 14 days to change your mind. Plans and laser files can't be returned. Terms and conditions
All fields are required.
